This article contains information regarding the different command and image files that Darkroom software writes when printing to a Fuji Pic/Frontier. This is important for setup and troubleshooting problems printing to the Fuji printer. This article also contains a...
This article contains information regarding the Epson 4800,7800, and 9800 printing the wrong sizes and or cutting the bottom off my sheets of wallets. To resolve this issue, you will need to download the latest drivers for your printer. The printers and the current...
This article contains information on tethering the Nikon D70 to Darkroom software. The D70 is set by default, to be a MASS STORAGE DEVICE. In order to tether the D70 to Darkroom Software, the USB setting must be set to PTP (PICTURE TRANSFER PROTOCOL) mode. Consult...
If you have your bleed scale set to 0% in Darkroom but the images are still being scaled up when printing to the AGFA D-Lab. Repro Mode determines if any adjustments will be made by the printer after the Darkroom software releases the prints to be printed. If Repro...
This article contains an attachment that provides bar codes that must be scanned before using a USB Barcode Scanner with Darkroom software. To use a USB barcode scanner which emulates a standardkeyboard, you must configure the scanner to transmit an STX (ASCII 02H)...
